NEWS |
 |
 |
|
|
 |
|
Chongqing Benhai Electronic Techonlgy Co.,Ltd
Phone£º18121066650
Contact: Mr. Mu.
Website: www.cqbhdz.com
Company Address: No. 27 Lailong Second Street, Fenghuanghu Industrial Park, Yongchuan District, Chongqing.
|
|
|
 |
common problem |
 |
|
 |
| Engine not working, ignition coil fault analysis |
| RELEASE TIME£º2025/9/6 SOURCE£ºChongqing Benhai Electronic Techonlgy Co.,Ltd READING£º59067TIME |
Engine not working, ignition coil fault analysis:
1. Using the wrong ignition coil, some car models have the same appearance as the ignition coil of the engine, but there are modules installed inside the coil and modules that have not been arranged. For example, BYD's new F3 has two different engines equipped with different ignition coils, one with built-in module and the other without module, but the appearance of the ignition coil is identical. The ignition coils of the Cruze 1.6 and Cruze 1.6T have almost the same appearance. But the Cruze 1.6 coil does not have a module installed; Cruze 1.6T coil module.
2. The wire harness plug on the car engine has loose contact with the ignition coil socket, but there is no contact. The external current does not pass through the low-voltage socket of the ignition coil, and the ignition coil does not work at all.
3. The module built into the ignition coil failed and was damaged after operation, rendering the ignition coil inoperable.
4. The low-voltage part of the ignition coil has virtual welding. Due to failure or long-term vibration of the coil, the ignition coil is damaged and cannot continue to work.
|
| |
| This article's website£ºhttp://www.cqbhdz.com/News_Show.asp?id=8 |
| THE PREVIOUS ONE£º
The engine ignition coil
|
| NEXT£º
Common fault diagnosis a
|
|
 |
 |
|
